Just solder

10 in stock

PCB + all components + complete enclosure

Maker-skills: Soldering


10 in stock

10 in stock

Support for trouble shooting, help or just a chat with the maker
Build your beatmaker’s sketchbook kit in our Berlin based office (Klick here for more information)
Support the Open-Source firmware development and get mentioned as a supporter in the firmware. The list of supporters will be visible on the device. Minimum amount is 25€ - each Euro counts!
Product total
Options total
Grand total

All prices include 19% VAT (Germany)

This kit is the perfect solution for makers without a 3D printer. You will receive everything you need to build the complete beatmaker’s sketchbook electronics and receive a handmade wooden enclosure, made from european beech. The enclosure will be natural wood, painted with clear matt de luxe coat, combined with 2/3 aluminum on the base plate. The key caps and all other needed parts (speaker holder, fader holder, volume wheel and spacers) are 3D printed. It comes with encoder caps and a red fader cap.

The Teensy 4.1 Microcontroller comes with pre-soldered memory extensions, so no SMD soldering will be needed.

This package contains:

  • Beatmaker’s sketchbook PCBs and more than 150 electrical
  • A complete handmade, wooden enclosure with the dark plexiglas pane
  • All needed 3D-printed parts

The package will be shipped about 4-6 weeks after order, as each case will be built on demand.

You need the following:

  • Soldering equipment
  • A Computer with Windows, Mac OS or Linux to upload new firmware versions. See www.pjrc.com/teensy/loader.html for details.
  • Standard USB Cable with 5 Pin Micro-B Connector

For needed tools, check the soldering guide.

The kit will be slightly different than on the pictures: Headphone jack will be on the back (believe me, it will be way more easy to assemble for you) and it will come already painted with clear matt deluxe coat.


Go to Top